Free installation advice Mon-Fri 8:30-5
sales@epicinsulation.co.uk
Solid Floor
Underfloor Heating
The 15mm Profix® Panel for 10mm to 12mm diameter pipes enables a high efficiency warm-water underfloor heating system to be installed on a solid floor with the underfloor heating pipework arranged in serpentine configuration.
Suspended Timber Floor
Underfloor Heating
The 15mm Profix® Panel for 10mm to 12mm diameter pipes can be installed on a suspended timber floor to create a high performance warm-water underfloor heating solution.
Acoustic Floor
Underfloor Heating
When combined with a thin compressed rubber acoustic isolation mat, the 15mm Profix® Panel for 10mm to 12mm diameter pipes can be used as an integral part of a warm-water underfloor heating solution, on separating solid floors or separating timber suspended floors, with the added benefit of impact noise reduction.
Highlights
Robust strength protects
pipes from foot traffic during
installation
Panels interlock together
via unique interlocking
features
Multiple fixing points allow
additional mechanical fixings
to be used if required
Self-adhesive backing
reduces need for mechanical
fixings (screws)
Suitable for systems using
a thin flowing screed or
as a dry-fit solution
Pipes held securely by
multiple pipe retention clips
in every panel
Can easily be cut to size
thanks to specially formed
V-shaped grooves
Manufactured in the
UK from 100% recycled
plastic
The Profix® Underfloor Heating Panel is suitable for the following building projects
Underfloor heating for new builds
Warm-water underfloor heating is a cost-effective, energy efficient space heating solution for new build properties.
With their self-adhesive backing and interlocking features, Profix® underfloor heating panels are very quick to installand guarantee the UFH pipework is always positioned at the correct spacing.
Incorporating a Profix® low-temperature warm-water underfloor heating system in a new build property, powered by a heat pump, will provide a ‘future-proofed’ space heating solution complying with the requirements of The Future Homes Standard and The Future Buildings Standard.
With its large surface area, a warm-water underfloor heating system can be an ideal space heating solution for retrofit projects.
At just 15mm in height, and with the added benefit of a self-adhesive backing, Profix® underfloor heating panels offer a very thin, fast-fix solution.
The self-adhesive backing on every 15mm Profix® Panel removes the risk of mechanical fixings compromising any hidden services within the existing sub-floor and, thanks to their very low profile, result in only a minimal increase to the current floor height.
Underfloor heating for renovations
The Profix® Panel and Profix® Panel Plus introduction videos
KF300 Insulation
lightweight high compressive
extruded insulation
SPECIFICATION
Compressive Strength 300kPa @ 10% compression
Thermal Conductivity 0.034 w/mk
Fire Classification Euroclass E
The perfect solution for upper floors on all types of projects.
KF300 Insulation is a lightweight high compressive extruded insulation finely cut to keep floor heights to a minimum, most suited for an insulation barrier from the subfloor or electric underfloor heating installations.
FEATURES
Lightweight, strong heat output, tile direct.
BENEFITS
A convenient to install system, with the added benefit that tiles can be laid directly on to panels.
ENERGY EFFICIENCY GUIDE
All our systems are energy efficient, but to assist you with your selection we have graded them A to C, where A is the most energy efficient. Note floor coverings used impact heat output.
Energy efficient rating: C+